VidBlaster Broadcast X5 Lifetime Download (cracked full)

VidBlaster Broadcast X5 Lifetime Download (cracked full)

VidBlasterX is available in 3 editions: Home, Studio & Broadcast. The difference between these editions is in the number of modules allowed in a single profile: the Home edition supports up to 7 modules, the Studio edition up to 25 and the Broadcast edition up to 100. The Broadcast edition also enables multiple recorder & streamer modules in a single profile and adds support for the JLCooper SloMo Elite-C controller. Another difference is the level of support: the Home & Studio editions come with community support, the Broadcast edition comes with both community and priority support.

VidBlasterX is a versatile and powerful ultra-low latency cascading vision mixer and video router with built-in scalers, time base correctors, frame synchronisers, IP video encoders and decoders, video players, recorders, keyers, effects and much more. VidBlasterX will put live video production right at your fingertips!

VidBlasterX is a native 64 bit program and requires a 64 bit version of Windows 7 or higher. Installing the program is straightforward and should not pose any problems. After installing a reboot may be required but only if you are prompted to do so. VidBlasterX can coexist with earlier major version of the program, each will have their unique folder and shortcuts, enabling you to trial new versions while continuing to use your current production version. At first run the program will check for a recent older version and attempt to import its profile.

To get the best performance from VidBlasterX a lot of factors need to be considered, but probably the most important factor is the CPU. VidBlasterX makes extensive use of multi-threading, and as a result has great multi core performance. So besides clock frequency, the number of cores is important as well. The picture below demonstrates how well VidBlasterX is able to do an even load distribution on a 6 core (12 virtual cores) i7-5820K CPU ingesting 8 HD streams.

Video scaling
If the resolution (aka size) of video frames do not match then they will be automatically scaled. Scaling introduces scaling artefacts as well as consumes extra resources. For best performance make sure all video streams, from in- to output, maintain the same video resolution.

Video frame rate conversion
If the frame rate of an incoming video stream does not match the main frame rate, or if the outgoing video frame rate does not match that of the target device, the frame rate of the video stream will be automatically converted. Frame rate conversion almost always introduces artefacts in the form of small interruptions or jumps in the video. For best performance try to maintain a uniform video frame rate throughout your entire setup.

Enable SyncLok
If (most of) your cameras and other video sources have stable and proper timing characteristics then enabling SyncLok will ensure a minimum of lost or doubled video frames, removing any video jitter you may experience. SyncLok must be enabled and achieved to obtain television broadcast worthy output.

DOWNLOAD LINK

https://k2s.cc/file/eca85c41bd011/VidBlaster_Broadcast_X5_Lifetime.rar